clearflo l1-R
ClearFlo L1-R is a high molecular weight chelating polymer, which forms strong, insoluble chelate complexes.
Due to the long-chained basic molecular structure, ClearFlo L1-R forms large strong flocs, which separate and settle immediately.
ClearFlo L1-R can also remove metals from complexes directly without having to pre-treat e.g. metal-EDTA complexes.
Metals can be removed to concentrations of <0.1mg/l with ClearFlo L1-R.
Due to the long-chained basic molecular structure, ClearFlo L1-R forms large strong flocs, which separate and settle immediately.
ClearFlo L1-R can also remove metals from complexes directly without having to pre-treat e.g. metal-EDTA complexes.
Metals can be removed to concentrations of <0.1mg/l with ClearFlo L1-R.
|
Chemical and Physical Properties:
Appearance: Brown transparent liquid Specific Gravity at 25°C: 1.25 – 1.35 g/cm3 pH (10% solution): 11.5 – 13.5 Viscosity (25°C) (mPa s): 10 – 60 Temperature Stability: -20°C – 180°C Applicable pH Range: 3-10 Molecular Weight (g/mol): 3,000 – 5,000 Selectivity for Metal Ions: Hg2+>Ag+>Cu2+>Pb2+>Zn2+>Ni2+>Cd2+>Fe3+>Mn2+ |
|
Typical Waste Water Treatment with ClearFlo L1-R:
• Adjust waste-water to the optimal treatment pH • Addition of ClearFlo L1-R (10 – 20 minute reaction time) • Addition of small amounts of FeCl3 or PAC (to improve flocculation and water-clarity plus eliminate excess ClearFlo L1-R) • Addition of flocculant (if necessary) Heavy metals captured by ClearFlo L1-R will not be found in the eluate of the formed slurry. Even when the employed water has a pH of 3. |
Sulphates
Sulphates can only be precipitated at ambient temperature to between 1500-1800mg/l and in the presence of sodium and potassium ions this is higher and often the limit of solubility is around 2500mg/l.
Water authorities want the sulphate level to be reduced to between 1000-1800mg/l this is so sulphate rich effluents don’t damage the sewer infrastructure.
A novel chemical precipitation method has been developed using the addition of aluminium and calcium. The chemical reaction is accelerated using ultrasound and its efficiency is improved.
The settlement and precipitation of the solid is aided by the addition of Clearflo L1-R
Sulphates can only be precipitated at ambient temperature to between 1500-1800mg/l and in the presence of sodium and potassium ions this is higher and often the limit of solubility is around 2500mg/l.
Water authorities want the sulphate level to be reduced to between 1000-1800mg/l this is so sulphate rich effluents don’t damage the sewer infrastructure.
A novel chemical precipitation method has been developed using the addition of aluminium and calcium. The chemical reaction is accelerated using ultrasound and its efficiency is improved.
The settlement and precipitation of the solid is aided by the addition of Clearflo L1-R
|
Packing:
25 kg nett one-way-plastic-drum 1,200 kg nett one-way-Container |
